Is your Hotpoint dishwasher displaying an error code? These error codes help diagnose common issues with your appliance. Here’s a guide to each error code, what causes them, and how to troubleshoot effectively.
What Are Hotpoint Dishwasher Error Codes?
Hotpoint dishwashers use error codes to point out specific problems. This can be issues with drainage, heating, or electrical faults. Identifying the correct Hotpoint error code helps in quick troubleshooting and repair.
Hotpoint Dishwasher Error Codes & Fixes
Error Code: F01 – Anti-Flooding Overflow
Your dishwasher detects water in the base tray, triggering an anti-flood mechanism.
- Fix: Check for leaks, empty the water from the base, and restart the dishwasher.
Error Code: F02 – Water Fill Solenoid Valve Failure
The dishwasher fails to fill due to a faulty inlet valve.
- Fix: Inspect the solenoid valve for blockages or damage and replace it if necessary.
Error Code: F03 – Water Drain Failure
The dishwasher isn’t draining properly, likely due to a clogged hose.
- Fix: Clean the drain hose, check for kinks, and ensure the drain pump is functional.
Error Code: F04 – Thermostat Fault
The dishwasher isn’t heating correctly, leaving the dishes dirty.
- Fix: Test the thermostat, replace it if it is faulty, and check the wiring connections.
Error Code: F06 – Water Fill Timeout
The dishwasher takes too long to fill with water.
- Fix: Ensure the water supply is on, check the water pressure, and inspect the inlet hose for blockages.
Error Code: F07 – Water Turbine Damage
The turbine that circulates water during the wash cycle is faulty.
- Fix: A professional technician must replace the damaged turbine.
Error Code: F08 – Temperature Timeout
Water isn’t reaching the correct temperature due to a heating element failure.
- Fix: Check the heating element; if it’s not reaching 40°C-65°C, replace it.
Error Code: F09 – Software Error
A firmware issue disrupts the dishwasher’s operations.
- Fix: Reset the dishwasher by unplugging it for 5 minutes. If the issue persists, the control board may need replacing.
Error Code: F10 – Heating Element Failure
The dishwasher is not heating water due to a faulty heating element.
- Fix: Replace the heating element to restore normal operation.
Error Code: F11 – Wash Pump Failure
The pump responsible for spraying water onto the dishes has failed.
- Fix: Replace the wash pump (a job best handled by a technician).
Error Code: F12 – Main Board & Display Communication Error
There is a communication failure between the main board and display.
- Fix: Power cycle the dishwasher. If the problem persists, check the display board wiring or replace the control board.
Error Code: F13 – Main Board Failure
The dishwasher’s control board is unresponsive, affecting operations.
- Fix: A replacement main board is required.
Error Code: F15 – Virtual Sensor Error
The dishwasher’s sensor system isn’t detecting the correct values, leading to malfunctions.
- Fix: A professional technician must diagnose and fix the virtual sensor.
How to Reset Your Hotpoint Dishwasher
If your dishwasher shows an error code but isn’t seriously damaged, try resetting it.
- Turn off the dishwasher and unplug it from the power supply.
- Wait for 5–10 minutes to allow the system to reset.
- Plug the dishwasher back in and press the Start button to restart the cycle.
If the error keeps happening, try the troubleshooting steps above. You can also contact Hotpoint’s customer service.
Hotpoint Dishwasher Flashing Lights: Meaning & Fixes
FAQs
How do I reset my Hotpoint dishwasher?
Unplug the dishwasher for five minutes, then reconnect it. Press the start/reset button for 10 seconds to clear minor glitches.
Why is my Hotpoint dishwasher not draining?
A clogged drain hose, a faulty drain pump, or a blocked filter can cause drainage failure. Clean the drain system and ensure proper water flow.
Can I repair my Hotpoint dishwasher myself?
Some issues, like a blocked drain hose (F03) or a clogged inlet valve (F02), can be fixed at home. But complex errors, like main board failures (F13), should be handled by a professional.
When should I call a professional?
If your dishwasher has a major issue, like a broken wash pump, heating element, or main board, it’s best to call a professional for repairs.
Final Thoughts
Understanding Hotpoint dishwasher error codes can save time and repair costs. For small problems, you can troubleshoot at home. But for bigger issues, it’s best to get a professional to help.
For expert dishwasher repair services, contact Hotpoint Customer Care or a qualified technician.
